BSLBATT 10 kWh Battery Power Wall
Whether it is a new or any retrofit photovoltaic system, this 10kWh battery is perfectly compatible with your solar system. It consists of 32 3.2V 100Ah cells running 16S2P to form a 51.2V 200Ah battery module with an actual capacity of 10.24kWh. Based on LiFePO4 technology, it has the characteristics of long life, safety, environmental protection and maintenance-free.
The 10kWh battery adopts a highly flexible modular design that can connect 16 identical Power Walls in parallel. Based on the exquisite module design, the entire battery weighs only 85Kg, and only two people can complete all installations.
Product Highlights of 10kWh Battery
● Module level auto-balancing ● Compatible with over 20 inverters ● Tier One, A+ Cell Composition ● 10.24kWh expandable up to 163.84kWh. ● AC Coupled for both new and retrofitted installations ● Non-Toxic & Non-Hazardous Cobalt-Free LFP Chemistry ● No Thermal Runaway with Fire Propagation ● No Heat Generation, Mitigation, Thermal Monitoring or Toxic Cooling ● Extended Operating Temperature -4 to 140F | ● Fast Charge & Discharge Rates ● ≥ 6000 Cycle Life with a 10 Year Warranty ● Cycle One to Several Times Per Day ● Seamless Integration with All Industry Standard Inverter/Charge Controllers ● Built-In Safety – BMS with Breaker On/Off Switch for Shipping & Installation ● Modular, Scalable & Proven Performance ● UL rated battery pack ● IP65 waterproof and dustproof ● 98% Efficiency Rate |
THE WORLD’S SMARTEST BATTERY MANAGEMENT SYSTEM
The reliability BMS system and high-performance equalization technology improve the overall safety and service life of the 10kWh battery. The entire system has the characteristics of flexible configuration and high reliability. The products are widely used in home energy storage, distributed energy storage, and photovoltaic energy storage.
1.It adopts lithium iron phosphate battery, which is environmentally friendly and safe. 2.The service life is long, the product can be guaranteed for 10 years, and the service life is more than 15 years. 3.Modular design, easy for customers to install and maintain. | 4.Small size, light weight, the same energy lithium battery, the weight and volume are 1/3 of the lead acid. 5.The configuration is flexible, and different capacities can be configured according to customer needs. 6.The power board and BMS can be easily replaced. |
Compatible with 20+ Inverters
BSLBATT Solar Wall Battery uses a leading BMS and has developed its own programming to be compatible with more than 20 inverter brands. When the batteries are connected to different brands of inverters, the BMS automatically recognises the inverter communication protocol and matches it.
The BSLBATT 10kWh battery Power Wall is the ideal energy storage solution for grid-tied or off-grid solar installations. Lower your utility bill by avoiding the need to buy electricity at peak times with the BSLBATT Lithium Battery Power Wall. With the BSLBATT 10kWh home Battery bank, you can use more clean energy in a more efficient way. This makes you more independent of daylight and utility power.
Specification of 10kWh Battery
| Model | BSLBATT 10kWh Battery Solar Power Wall | |
Electrical Characteristics | Nominal Voltage | 51.2 V (16series) |
| Nominal Capacity | 200 Ah | |
| Energy | 10.24 kWh | |
| Internal Resistance | ≤60mΩ | |
| Cycle Life | ≥6000 cycles @ 80% DOD, 25℃, 0.5C ≥5000 cycles @ 80% DOD, 40℃, 0.5C | |
| Design Life | ≥15 years | |
| Months Self Discharge | ≤2%，@25℃ | |
| Effificiency of Charge | ≥98% | |
| Effificiency of Discharge | ≥100% @ 0.2C ≥96% @ 1C | |
Charge | Charge Cut-off Voltage | 58.4V |
| Charge Mode | 1C to 54.0V, then 54.0V charge current to 0.02C (CC/CV) | |
| Charge Current | 80A | |
| Max. Charge Current | 100A | |
Discharge | Continuous Current | 80A |
| Max. Continuous Discharge Current | 100A | |
| Discharge Cut-off Voltage | 43.2V | |
Environmental | Charge Temperature | 0℃~60℃ (Under 0℃ extra heating mechanism) |
| Discharge Temperature | -20℃~60℃ (Under 0℃work with reduced capacity) | |
| Storage Temperature | -40℃~55℃ @ 60%±25% relative humidity | |
| Water Dust Resistance | IP65 | |
Mechanical | Method | 16S2P |
| Case | Iron (Insulation painting) | |
| Dimensions | 762*518*148 mm | |
| Weight | Approx:85 kg | |
| Gravimetric Specifific energy | Approx:120.5 Wh/kg | |
| Protocol (optional) | RS232-PC RS485(B)-PC RS485(A)-Inverter CANBUS-Inverter | |
Cases of BSLBATT Lithium Solar Battery
Performance Characteristics
 |  |
 |  |
The BSLBATT storage systems capture excess solar energy to provide power when it is needed most—when the power goes out, when electricity prices spike, or when the sun isn’t shining. BSLBATT curates a portfolio of hardware options from internationally recognized battery and power electronics suppliers in order to provide homeowners and businesses with safe, reliable, and renewable power.
As one of the top lithium ion solar battery manufacturers, we can custom different specification batteries. Voltage: 12 to 48V; capacity: 50Ah to 600ah.
Testimonials
“BSLBATT batteries eliminated the most difficult challenges we face when building microgrids in remote tropical locations. The batteries are much easier to transport and they have a good chance of lasting the entire 20 years. This means BSLBATT batteries generally pay for themselves in under 4 years!”
